Stainless N60 Product Guide

Applications | Specifications | Mechanical and Chemical Data | Tolerances

Overview

Also called "Nitronic 60", this alloy has exceptional wear and galling resistance. Designed as an all-purpose steel, it is a fully austenitic alloy that maintains its physical properties up to about 1800 F. Additionally, N60 has about twice the yield strength of 304 and 316 stainless. It is typically used in fasteners, pins and bushings, wear rails, roller bearings, and pump components.

NITRONIC is a trademark of AK Steel.

Common Trade Names

UNS S21800, Alloy 218, N60 Stainless, Nitrogen-Strengthened Stainless Steel

Other Resources

Safety Data Sheet | Weight Calculator | Mill Test Reports

Products

Purchase Round Bar N60

Applications

Pins
Fasteners
Bushings
Wear Rails
Roller Bearings
Pump Components

Stainless N60 Specifications

ASTM	AMS	ASME
A193	5848	A194
A194		A479
A276
F899


Physical Properties Nitronic 60
Density	0.275 lb/in3
Ultimate Tensile Strength	103 ksi
Yield Tensile Strength	60 ksi
Shear Modulus	10,500 ksi
Shear Strength	73 ksi
Hardness Rockwell \| Brinell	B95 \| 210
Elongation at Break Percentage	64%
Reduction of Area	73%
Modulus of Elasticity	27,000 ksi
Poisson's Ratio	0.30
Machinability Percentage	24%
Melting Point	2,400-2,470 °F
Specific Heat	1.2 x 10^-1 BTU/lb-°F
Thermal Conductivity	108 BTU-in/hr-ft^2-°F

Chemistry Information
Element	Percentage
Fe	62
Cr	17
N	0.14
Ni	8.5
Mn	8
Si	4

Open for Orders 24/7!